Product Description
The high-performance design and engineering that Kraus handlebar and riser kits have become known for is now available to the Harley Low Rider S/ST. This kit complements the attitude of your Harley Davidson Softail Low Rider S/ST while getting you in a more upright riding position. Additionally, this setup drastically reduces the amount of unwanted leverage being placed on your bike's bushings while providing a much more solid bar feel. You'll have greater confidence in how your ride handles with this superior upgrade.
This Kit comes COMPLETE with:
- Kraus 10" Kickback Isolated Risers - Black Anodized
- Kraus KR Low Bars - Stainless Steel/Thermal Gold Stainless Steel/Titanium
- Lowrider S Gauge Bucket - with 1.25" T-Bar Clamp & 3" Extension
NOTE: Handlebar and Risers are 1" clamping size ONLY
The total hand position height of this setup measured from the top of the stock triple tree is listed below.
- 10" Riser option with KR Low Bars = 13.25" total
Fitment
- 2025 and Up — Softail (Does not fit Heritage Classic or Fat Boy)
- Changes to Lines May be Necessary, Please See Recommended Line Lengths Below
(For 2018-2024 Softails with 4-in. analog gauge, see the product-specific page listed here.)
(For 2018-2024 Softails with digital gauge, see the product-specific page listed here.)
Recommended Line Lengths & Additional Fitment Information
Breakout
Longer Clutch and Brake Line are required to install this kit. Harley Clutch Line PN: 37200619 is recommended. Please see the suggested side menu for Brake Line options.
"FXST Speedometer & Instrument Extension Harness" will be necessary for installation.
Lowrider S
Existing OEM Clutch and Brake Line can be used for installation, but cables will need to be routed behind risers during installation. The OEM Brake Line can be loosened and rotated clockwise for more length. If OEM Clutch Line routing through the Triple Tree is preferred, Longer Harley Clutch Line PN: 37200619 is recommended. Additionally, if a longer brake line for OEM routing is preferred, brake lines can be purchased from the side menu.
"FXST Speedometer & Instrument Extension Harness" will be necessary for installation.
Lowrider ST
Existing OEM Clutch and Brake Line can be used for installation, but cables will need to be routed behind risers during installation. The OEM Brake Line can be loosened and rotated clockwise for more length. If OEM Clutch Line routing through the Triple Tree is preferred, Longer Harley Clutch Line PN: 37200619 is recommended. Additionally, if a longer brake line for OEM routing is preferred, brake lines can be purchased from the side menu.
"FXST Speedometer & Instrument Extension Harness" will be necessary for installation.
Street Bob
Existing OEM Clutch and Brake Lines can be used without any alterations.
"FXST Speedometer & Instrument Extension Harness" will be necessary for installation.
NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.
